Piling Tools - Conical Auger
Conical Auger
Our conical Auger are suitable for drilling very hard Rock, Sedimentary rocks and Igneous rocks, are have the hardness of 50-100 mps. Single Start are used drill the hardness range of (50 — 100 mpa) Double start are used to drill the hardness Range of more than 100 (>100mpa)
Technical Specification
| CENTRAL PIPE | BLADES | KELLY BOX |
|---|---|---|
| Ø = 159/203 mm | Thickness = 30/40 mm | 200×200 mm |
| Thickness = 25/30 mm | Pitch = 300/600 mm | 130×130 mm |
| Tung Studs HB 900 | ||
| Rock Pilot bit | ||
| Interchangeable |
| AUGER PART NO: | PILE DIA | CUTTING DIA MM | FLIGHT THICKNESS MM | PITCH MM | FLIGHT LENGHT MM |
|---|---|---|---|---|---|
| BSA1101 | 600 | 560 | 30 mm As per Customer requirements | 300 | 1200 |
| BSA1102 | 700 | 660 | |||
| BSA1103 | 800 | 760 | |||
| BSA1104 | 900 | 860 | |||
| BSA1105 | 900 | 960 | |||
| BSA1106 | 1100 | 1060 | 450 | ||
| BSA1107 | 1200 | 1160 | |||
| BSA1108 | 1300 | 1260 | |||
| BSA1109 | 1400 | 1360 | |||
| BSA1110 | 1500 | 1460 | |||
| BSA1111 | 1600 | 1560 | 600 | ||
| BSA1112 | 1700 | 1660 | |||
| BSA1113 | 1800 | 1760 | |||
| BSA1114 | 1900 | 1860 | |||
| BSA1115 | 2000 | 1960 | 1500 | ||
| BSA1116 | 2100 | 2060 | |||
| BSA1117 | 2200 | 2160 | |||
| BSA1118 | 2300 | 2260 | |||
| BSA1119 | 2400 | 2360 | |||
| BSA1120 | 2500 | 2460 |